New Compression Load Cells will measure up to 100 tonnes using strain gauge technology
30 April 2010
|
The SCL Compression Loadcell, now available from Celsum Technologies Ltd, can be supplied with full scale ranges between 1 tonne and 100 tonnes, or 10kN and 1,000kN (or 1MN). Fabricated from stainless steel, these precision force transducers are sealed to IP67 to the BS60529 standard, and use a 700 ohm strain gauge bridge with a sensitivity of 1.5mV/V. Designed with long term resistance to fatigue, the SCL loadcells have a high cycle life, a safe overload capacity of 150% of full scale, and an ultimate overload limit of 300% of full scale. The maximum error is 0.05% of full scale, and they have a compensated temperature range of 0 to 50°C. Excitation voltages of 5 to 15 volts AC or DC may be used, and traceable calibration certificates may be supplied for just the loadcell or for the loadcell with instrumentation. For systems using multiple load cells, the outputs of the sensors can be standardised.
Says Celsum's Roy Carter, "The SCL load cell is a welcome addition to the range that we offer, with applications from materials testing through to weighing, and from on-line process control to R & D and quality control. As well as this an other load cells, we offer a wide range of instrumentation, too, from simple analogue amplifiers to digital electronics with computer interfaces and precision digital displays and controllers, to state-of-the-art wireless telemetry."
For further information, please contact:
Roy E Carter MSc CEng FIM3
Managing Director
Celsum Technologies Ltd
The Innovation Centre
De Montfort University
49 Oxford Street
Leicester LE1 5XY
United Kingdom
Tel: +44-(0)116 207 8807
Fax: +44-(0)870 120 9370
Email: roy@celsum.com
Web: www.celsum.com
|
|
