Friday 17/1/2020

Bookmark and Share
 
 
Product Focus
  PandCT RSS Product Focus feed
SMART GAUGES HAVE NEW SENSORS

17 August 2011

Labcell has introduced the Meriam M2110 Series Smart Gauge. The new instruments benefit from a fully compensated Embedded Pressure Instrument (EPI) - as used on the Meriam 1500 series pressure gauges - that provides an accurate and fully characterised digital output with fast response.

The Meriam M2110 series are general-purpose gauges for measuring pressure, flow or level, depending on the gauge specified and the engineering units selected. Pressure ranges are available for reading differential, gauge, compound gauge and absolute pressure for a variety of gases and liquids. Depending on the model selected, pressures up 3000 PSIG can be measured, with is higher than for the original Smart Gauges. NIST-traceable accuracy is +/-0.05% of full scale for all models, independent of temperature, across a range of -20 to +50 degrees C (-4 to +122 degrees F).

Installed in a 1/4 DIN aluminium enclosure with an epoxy finish, the gauges feature a 4.5-digit LCD with 15.24mm high digits and LED backlighting, plus a sealed membrane keypad with four buttons. Customers can choose between units designed for panel-mounting, pipe-mounting or for benchtop use. Versatility is further enhanced by options for operation from a battery, 24V DC or AC power supply. All models benefit from RS232 communications, while the AC units also have SPDT relays and the 24V DC units have a 4-20mA output. The smart gauges are therefore simple to incorporate within process control and data acquisition systems.

To minimise the effects of pulsating pressures, the smart gauges feature adjustable damping with a time constant that is user-selectable from 0.1 to 50 seconds.

Typical applications for the Meriam M2110 smart gauges include process control systems and evaluation and test rigs. For example, in the automotive industry the instruments are used for measuring air intake flow rates and pressures in engine dynamometer test cells.

Labcell is a main UK distributor for Meriam and the new instruments are available for rapid delivery. Data sheets can be downloaded directly from Labcell's website at www.labcell.com, contact the company with specific enquiries by telephone on 01420 568150 or email mail@labcell.com .
PandCT.com are not responsible for the content of submitted or externally produced articles and images.
Click here to email PandCT about any errors or omissions contained within this article.
     
Send this page
To send this page to a colleague or friend,
fill in the email addresses below...
Your email address
Their email address:
Page to be sent: shownews.asp?ID=30050

Company gateway pages
for Labcell Ltd:
FREE Information on the products in this article
To request more information from this supplier,
fill in your email address below.
Your email address
 
     
Bookmark and Share
Product categories: Accelerometers | Actuators | Agitators | Analysers | Bearings | Compressors | Controllers | Conveyors | Drives | Enclosures | Flowmeters | Heat Exchangers | Motors | Pumps | Relays | Sensors | Transducers | Transmitters | Valves | Weighing
(c) Copyright 1999-2020 Process and Control Today Ltd  |  Reg. no 3733110  |  Email Editor  |  Email Webmaster  |  Sitemap  |  Privacy Policy