Tuesday 24/9/2019

Bookmark and Share
Daily News
  PandCT RSS Daily News feed
Next generation Westermo Ethernet switches improve onboard railway communication network reliability

16 February 2012

Compact, rugged and reliable EN 50155 approved industrial Ethernet switches simplify onboard communications applications

To meet the growing demand for reliable onboard railway communications networks, Westermo has introduced a new generation of industrial Ethernet switches that provide highly robust networks and long term field operation. Specifically designed for onboard applications around the »Westermo IP train concept», the new Viper-212, Viper-112 and Viper 012 twelve-port switches, deliver a complete solution for onboard control systems, including improved levels of reliability and simplified network design, installation and maintenance.

The Westermo IP train concept provides a complete EN50155 Ethernet switch and routing solution providing an ultra-reliable network backbone for the creation of intelligent trains. This concept has been developed in answer to the many unique requirements of the rail industry which can be solved using a suite of IP protocols delivered by the Westermo Operating System - WeOS.

Onboard rolling stock applications present one of the toughest environments for any electronic device. The Viper series exceeds the EN 50155 onboard railway standard for electronic equipment, which encompasses not only EMC requirements, but also shock, vibration, extended temperature range and humidity. The switches have also been designed to achieve the highest mean time between failures of up to 900,000 hours, ensuring the extremely long-term and reliable field operation that is expected within the railway industry.

The Viper 212 is a managed layer 3 routing switch, The Viper 112 offers managed layer 2 switching functionality and the Viper 012 is an unmanaged solution. These different levels of software functionality allow users to select the most appropriate level of functionality for their network whilst still having hardware that meets the toughest environmental challenges.

The new Viper series incorporates M12 connectors that are integrated into the housing to reduce size and further protect against vibration. With an ultra-robust design, sealed to IP65 and vibration resistant to military standards, these units are ideal for situations where mechanical stress, moisture, condensation; dirt or continuous vibrations (such as those produced by engine) could adversely affect the function of standard Ethernet switches. A unique Gore-Tex membrane is used to prevent condensation build up by normal climatic day/night cycling. The Viper-212 is also very compact and ultra-thin, enabling installation within the confined spaces of railcar panels.

The WeOS operating system of the Viper and RedFox switches is able to balance data traffic on the network to maintain maximum throughout and stability. The introduction of increased traffic from new cameras or video stream will therefore not affect the stability of the entire network. In the event of any link or hardware failure Westermo�'s unique FRNT technology is able to re-configure a large network in 20ms.

For easy configuration, the Ethernet switches can be safely accessed from anywhere in the network, or directly via a console port on the Viper switch or an Ethernet or USB port on the RedFox switch. The configuration can be backed up and restored in seconds using a using a special M12 USB memory stick. An easy to use, secure web configuration interface simplifies the setting up of a redundant ring network.

Westermo provides a full range of industrial data communications solutions for demanding applications in the transport, water and energy markets among others. For more than 35 years Westermo has been at the forefront of technological development and often pushed the limits of what is technically possible. In order to provide the best possible support, we have local presence in more than 35 countries through our authorized distributors and own offices. Since 2008 Westermo has been part of the Beijer Electronics Group, a fast growing technology company with extensive experience of industrial automation, developing and marketing competitive products and solutions with focus on the user.

Westermo Data Communications Ltd
Talisman Business Centre
Duncan Road
Park Gate
SO31 7GA
Phone: +44 (0)1489 580585
Fax: +44 (0)1489 580586
PandCT.com are not responsible for the content of submitted or externally produced articles and images.
Click here to email PandCT about any errors or omissions contained within this article.
Send this page
To send this page to a colleague or friend,
fill in the email addresses below...
Your email address
Their email address:
Page to be sent: shownews.asp?ID=31962

Company gateway pages
for Westermo Teleindustri AB:
FREE Information on the products in this article
To request more information,
fill in your email address below.
Your email address
Bookmark and Share
Product categories: Accelerometers | Actuators | Agitators | Analysers | Bearings | Compressors | Controllers | Conveyors | Drives | Enclosures | Flowmeters | Heat Exchangers | Motors | Pumps | Relays | Sensors | Transducers | Transmitters | Valves | Weighing
(c) Copyright 1999-2019 Process and Control Today Ltd  |  Reg. no 3733110  |  Email Editor  |  Email Webmaster  |  Sitemap  |  Privacy Policy