Sunday 27/5/2018

Bookmark and Share
 
 
Case Studies
  PandCT RSS Case Studies feed
OH CRUMBS, SOLVED AT LAST

28 February 2012

A process that defied automation has finally been brought into the 21st century by systems integrator Clint Johnson of the wonderfully named Control Freaks Ltd, who has developed an all-Mitsubishi Electric solution.

He automated a machine for producing biscuit crumbs, breakfast cereal and snack foods, replacing a labour intensive manual process with one that guarantees consistent results.

“The basic process is to mix ingredients into uniform pellets and dry them,” explains Clint. “Sounds easy enough, but the devil is in the detail.”

Getting a consistent mix was difficult, and the liquid content needed to form pellets tended to cause the entire mix to clag up into one stodgy amorphous lump.

The system includes two horizontal spiral blade mixers. These are run backwards and forwards at different speeds to achieve a thorough mix.

“There is quite an art to the speed profiles we use, each product seems to require a unique pattern of fast and slow, forward and backwards. We have stored those profiles as recipes on a Mitsubishi FX3U PLC (programmable logic controller), which controls a number of 15 kW E700 and D700 variable speed drives on the mixer axes over an RS485 network.”

Feedback loops read the current in the motors to gauge the mix consistency.

The finished mix then flows through a series of holding hoppers and graters to form the desired pellet size. From here a dosing mechanism drops the pellets onto a conveyor and a series of levelling systems to even it out into a consistent layer before it moves into a dryer to form the final dry product.

“This was quite a complex job in itself, but there were two more related issues we had to address. The first was machine safety; operators would regularly have to access the machine for product changeovers, cleaning and maintenance. The second was that the machine had to be built as several separate subsystems then connected up without compromising operator safety.”

The solution was to define several discrete safety zones within the machine and connect them up with a control system that could determine whether to stop a single zone, several zones or the whole machine as appropriate.

“We ended up with two-hand controls, multiple emergency stop zones, interlocks on the access doors and trapped key mechanisms for assembling the various sections together,” recalls Clint. “In all there are about 30 safety switches across the machine that all needed to be interconnected into one coherent system.”

Mitsubishi Electric recommended the use of a single WS Safety Controller, part of its integrated safety range, with which it was straightforward to define an effective multi-level control network. This was networked with the FX plus an E1163 HMI using Ethernet, so that a full record of diagnostics was logged and instantly available for analysis.

“Handling the pelletised material was difficult, but it was really the safety implications that had floored previous attempts to automate the process. The capabilities of the WS Controller made this far easier than was previously possible; we could work through the various possible safety sequences in the same way as the production processes.”

For further information, please contact Amaechi Oduah:

Mitsubishi Electric Europe B.V. Automation Systems Division

Travellers Lane
Hatfield
Hertfordshire
AL10 8XB

Tel: 01707 276 100
Fax: 01707 278 695
Email: automation@meuk.mee.com 
Web: http://automationsolutions.mitsubishielectric.co.uk
PandCT.com are not responsible for the content of submitted or externally produced articles and images.
Click here to email PandCT about any errors or omissions contained within this article.
     
Send this page
To send this page to a colleague or friend,
fill in the email addresses below...
Your email address
Their email address:
Page to be sent: shownews.asp?ID=32083

Company gateway pages
for Mitsubishi Electric Europe:
FREE Information on the products in this article
To request more information from this supplier,
fill in your email address below.
Your email address
 
     
Bookmark and Share
Product categories: Accelerometers | Actuators | Agitators | Analysers | Bearings | Compressors | Controllers | Conveyors | Drives | Enclosures | Flowmeters | Heat Exchangers | Motors | Pumps | Relays | Sensors | Transducers | Transmitters | Valves | Weighing
(c) Copyright 1999-2018 Process and Control Today Ltd  |  Reg. no 3733110  |  Email Editor  |  Email Webmaster  |  Sitemap  |  Privacy Policy