Thursday 22/8/2019

Bookmark and Share
 
 
Product Focus
  PandCT RSS Product Focus feed
New smart-house Dimmer from Carlo Gavazzi Improves Energy Efficiency Superb performance with LED lighting

29 February 2012

Aldershot, UK, 27 February 2012 – Strengthening its position in the home automation market, Carlo Gavazzi has launched the energy efficient SH2 Smart-house Dimmer for use with resistive, inductive and capacitive loads with a total load capacity of 3 to 500W. 

Designed for DIN-rail mounting, the SH2 dimmer is ideal for installations requiring lighting control to reduce power consumption or set scenes. The dimmer delivers improved dimming performance and features programmable ramp and soft start / stop times.

The SH2 dimmer has also been specifically designed to function with LED lamps which can cause flickering and poor dimming performance with existing dimmers, because of their complex load characteristics. SH2 has a minimum load of 3W and features selectable curves to cater for the different LED technologies available on the market. This means LED lamps can be dimmed over a wide range and remain flicker free.

Featuring automatic load detection for L, R and C loads and a soft start/stop, the SH2 dimmer switch incorporates an integrated heat sink for temperature dissipation that enables multiple dimmers to be mounted adjacent to each other without reduction in nominal power. The SH2’s internal bus enables it to be easily connected to adjacent dimmers without the need to cable the Dupline Bus. Encased in a 2 DIN housing, the dimmer features protection against short circuit, overload and over-temperature and does not require extra wiring when installing into the Smart-house cabinet.

Based on the Dupline® Installation bus, Smart-house is a home automation product that controls and monitors lighting, roller blinds, heating, air-conditioning and security and is easy to incorporate into both new build and refurbishment projects. The Smart-house system opens up new opportunities to reduce energy consumption and increase the comfort and safety of homes. Operation, service and maintenance are simplified, with complete status overview available anytime and anywhere using an Internet connection.

For more information contact:

Carlo Gavazzi UK Ltd
, 7 Springlakes Industrial Estate, Deadbrook Lane, Aldershot, Hampshire, GU12 4UH tel: +44 (0) 1252 339600, fax: +44 (0) 1252 326799, email: sales@carlogavazzi.co.uk web: www.carlogavazzi.co.uk
PandCT.com are not responsible for the content of submitted or externally produced articles and images.
Click here to email PandCT about any errors or omissions contained within this article.
     
Send this page
To send this page to a colleague or friend,
fill in the email addresses below...
Your email address
Their email address:
Page to be sent: shownews.asp?ID=32101

Company gateway pages
for Carlo Gavazzi UK Ltd:
FREE Information on the products in this article
To request more information from this supplier,
fill in your email address below.
Your email address
 
     
Bookmark and Share
Product categories: Accelerometers | Actuators | Agitators | Analysers | Bearings | Compressors | Controllers | Conveyors | Drives | Enclosures | Flowmeters | Heat Exchangers | Motors | Pumps | Relays | Sensors | Transducers | Transmitters | Valves | Weighing
(c) Copyright 1999-2019 Process and Control Today Ltd  |  Reg. no 3733110  |  Email Editor  |  Email Webmaster  |  Sitemap  |  Privacy Policy