Thursday 20/6/2013

Bookmark and Share
 
 
Product Focus
  PandCT RSS Product Focus feed
Programmable stepper-motor driver IC offers improved programmability and diagnostics

9 May 2012

The new A4979 from Allegro MicroSystems Europe is a programmable stepper motor driver IC with microstepping capability and improved programmability and diagnostics.

The new device is a flexible microstepping motor driver with a built-in translator for easy operation. It offers a single-chip solution for operating bipolar stepper motors in full-, half-, quarter- and sixteenth-step modes at voltages up to 50 V and currents up to 1.5 A.

The A4979 uses all digital timing, with no need for external timing components, and utilizes a serial port (SPI) for programming operating parameters and reading back diagnostic information. The device can be controlled by simple step and direction inputs or through the SPI-compatible serial interface.

The current regulator can be programmed to operate in fixed off-time or fixed frequency pulse-width modulation modes, with several decay modes available to reduce audible motor noise and increase step accuracy. In addition, phase current tables can be programmed via the serial interface to create unique microstepping current profiles to further improve motor performance for specific applications.

Circuit protection includes cross-conduction when switching between high-side and low-side drives. The outputs are protected from short circuits. Mixed decay is a key feature integrated within the device to improve low load current accuracy. Other protection features include stall detection and hot and cold thermal warnings, overtemperature shutdown and undervoltage lockout.

This new device is targeted at the office automation, industrial and consumer markets.
The A4979 is available in a 28-pin TSSOP package (suffix LP) with exposed pad for enhanced thermal dissipation.

Please click here to download a copy of the data sheet.

For further information please contact:

Allegro MicroSystems Europe Ltd

Melita House
124 Bridge Road
Chertsey
Surrey
KT16 8LH

Tel: +33 (0) 4 50512359
Fax: +33 (0) 4 505 12083

mailto:allegroeurope@allegromicro.com
http://www.allegromicro.com
PandCT.com are not responsible for the content of submitted or externally produced articles and images.
Click here to email PandCT about any errors or omissions contained within this article.
     
Send this page
To send this page to a colleague or friend,
fill in the email addresses below...
Your email address
Their email address:
Page to be sent: shownews.asp?ID=32859

Company gateway pages
for Allegro Microsystems Europe Ltd:
FREE Information on the products in this article
To request more information from this supplier,
fill in your email address below.
Your email address
 
     
Bookmark and Share
Product categories: Accelerometers | Actuators | Agitators | Analysers | Bearings | Compressors | Controllers | Conveyors | Drives | Enclosures | Flowmeters | Heat Exchangers | Motors | Pumps | Relays | Sensors | Transducers | Transmitters | Valves | Weighing
(c) Copyright 1999-2013 Process and Control Today Ltd  |  Reg. no 3733110  |  Email Editor  |  Email Webmaster  |  Sitemap  |  Privacy Policy