Sunday 16/12/2018

Bookmark and Share
 
 
Case Studies
  PandCT RSS Case Studies feed
Motors drive the pumping heart of new Brazilian refinery

4 February 2013

A petrochemical refinery in Brazil is turning up the steam to meet increased domestic demand by becoming the first crude oil refinery to be entirely built with Brazilian technology. This includes WEG motors at the heart of one of their core processes.

The eleven three-phase induction motors, suitable for operation in explosive atmospheres will be used to drive the centrifugal pumps feeding water into the cooling towers at the Petrobras Abreu e Lima Refinery in Ipojuca, Pernambuco. This is one of the wealthiest regions of Brazil, and close to the world famous beach resorts of Porto de Galinhas.

The pumps and motors are to be located in the refining area and will be used to feed the cooling towers associated with the site’s main steam turbines. The pumps will operate to provide water for circulation and for cooling the plant and equipment which is critically important within the refining process. The pumps are being supplied by KSB, which has been manufacturing in Brazil for over 50 years.

“These KSB pumps and associated equipment require special motors that offer a high degree of reliability,” explains WEG engineer, Marcelo Vedana. To enhance their reliability the motors are designed to be robust and use the best quality bearings and ancillary components. The windings are precision made and balanced, whilst advanced thermal management ensures cool running.

Explosion proof motors are designed to contain an explosion if it occurs within the motor. This is to prevent the release of explosive gases and to minimize internal sparking within the motor. They are most commonly used in the chemical, mining, textile and petrochemical industries, but also find applications in many other fields. Not only must an explosion proof motor be designed to reduce the likelihood of exploding, it must also be capable of completely containing an internal explosion so that it does not propagate to the surrounding area. Thus their bodies tend to be more robust than standard motors and to be able to maintain integrity at highly elevated temperatures. They must also resist corrosion and to have flame-tight joints and flanges with minimum tolerances so that hot gases from an internal explosion will cool down before exiting to the wider environment.

There are several approval bodies that can certify motors are explosion proof. As a major international motor manufacturer, WEG meets the safety requirements for all regions. Petrobras, amongst the five biggest energy companies in the world, says that Abreu e Lima is one of the most advanced refineries ever built in Brazilian territory. It will be the first with the capability to process 100% heavy crude oil with the minimum environmental impact and to produce fuel with a lower sulphur content than that required by the strictest of international standards, that is to say 10 ppm of sulphur.

Brazil is widely recognised as one of the fastest developing countries of the world, being listed in the BRIC acronym (Brazil, Russia, India and China) as having a rapidly advancing economy. Its population is about 200 million and its land mass makes it the fifth largest country in the world. Rich in natural resources, it also has tremendous potential for hydroelectric power generation.

For further information, please contact Marek Lukaszczyk:

WEG Electric Motors (UK) Ltd
, 28/29 Walkers Road, Manorside Industrial Estate, North Moons Moat, Redditch, Worcs. B98 9ND Tel: +44(0)1527 596748 Fax: +44(0)1527 68726 mail: wegsales@wegelectricmotors.co.uk  Web: www.weg.net
PandCT.com are not responsible for the content of submitted or externally produced articles and images.
Click here to email PandCT about any errors or omissions contained within this article.
     
Send this page
To send this page to a colleague or friend,
fill in the email addresses below...
Your email address
Their email address:
Page to be sent: shownews.asp?ID=35652

Company gateway pages
for WEG (UK) Ltd:
FREE Information on the products in this article
To request more information from this supplier,
fill in your email address below.
Your email address
 
     
Bookmark and Share
Product categories: Accelerometers | Actuators | Agitators | Analysers | Bearings | Compressors | Controllers | Conveyors | Drives | Enclosures | Flowmeters | Heat Exchangers | Motors | Pumps | Relays | Sensors | Transducers | Transmitters | Valves | Weighing
(c) Copyright 1999-2018 Process and Control Today Ltd  |  Reg. no 3733110  |  Email Editor  |  Email Webmaster  |  Sitemap  |  Privacy Policy