Thursday 27/2/2020

Bookmark and Share
Case Studies
  PandCT RSS Case Studies feed
Nestlé uses a KNOLL double screw pump

16 May 2013

Today, chocolates, chocolate bars and a variety of pralines are manufactured industrially. Nevertheless, the process of making chocolate demands considerable know-how and can only be carried out efficiently using modern systems. Innovative manufacturers - such as Nestlé AG - use, for example, the double screw pump from KNOLL MB, to plasticise large blocks of chocolate.

After adding cocoa paste, cocoa butter, powdered milk and sugar, the mix is heated to a temperature of over 40 degrees and then slowly cooled to give the chocolate its delicate smoothness, smooth texture and shelf stability. At Nestlé, the chocolate is poured into blocks measuring 500 x 300 x 150 mm and stored in a cooling room at 12°C before being processed into various chocolate fillings.

To be able to mix this chocolate paste with nuts, raisins or other ingredients, the hard blocks must first be softened. In the past, they were stored in a warming room for several days at 28°C for this purpose. They could then be blended with other ingredients in a mixer, homogenised and, finally, fed into the extruder for final processing into pralines and other chocolates.

Double screw pumps are able to plasticise solid blocks

Today, chocolate pralines take less time to make. Using innovative pump technology delivered by KNOLL, the 12°C chocolate blocks can now be processed directly, thus eliminating the need for preheating in the warming room and all the transportation this involves. This makes the production process more flexible, timesaving and efficient. This gain in productivity partly originates from the KNOLL double screw pump, which has the ability to process and plasticise solid blocks of chocolate even at very low temperatures. The hard blocks of chocolate are transformed into a viscous mass which can subsequently be conveyed even large distances to the extruder by high-pressure KNOLL MX progressing cavity pumps. The extruder squirts the chocolate filling into the desired shape before the confectionary is finally coated with chocolate and decorated, then cooled and finally packaged.

Continuous flow

At the heart of a double screw pump such as this, is a full screw and an open screw which intermesh. This produces a forced-feed effect, so that everything which enters the pump is reliably pushed out. Formation of rolls is prevented by the interlocking of the screws. Since the air in the screws is able to flow out backwards through a narrow gap, the medium is conveyed continuously and free from air. This is an important factor if the medium is to be cut, processed or dispensed straight after leaving the pressure nozzle. KNOLL has positioned a gear between the drive and the actual pump for synchronising the screws. That guarantees contact-free intermeshing, minimising wear and contributing to the dry-run safe operation of the pump. The KNOLL double screw pump is available with plastic or stainless steel screws; the latter are recommended for processing blocks of chocolate. Plastic screws - made of food-compatible polyamide - are ideal for use at extremely low temperatures, i.e. for processing solid blocks of product at temperatures as low as -18°C. In this case, the pump is preceded by a reducer which breaks the large blocks into pieces 10 x 10 cm in size before they drop into the double screw pump.

Well-thought-out pump design

The delivery capacity of the KNOLL double screw pump, which can be up to 10 t/h, is not the only testament to a well-thought-out development. The ease of cleaning of the pump is also an important criterion in the foodstuffs sector in particular. For example, all separation points feature quick-release catches. The drive unit can be removed from the pump housing on a rail system, complete with the screws. The screws and housing are then exposed and can be manually cleaned with a steam blaster or similar. Very little residue remains in the pump after the conveyance operation. This is because the geometry of the pump housing is so precisely measured that the gap is just a few tenths of a millimetre. Accident prevention regulations have been strictly observed in the design. For example, a non-contact safety switch provides for reliable stoppage of the drive when the pressure nozzle is opened (this can be done using a hinge). The KNOLL double-screw pump is designed for the food industry and is therefore fully compliant with FDA requirements. The housing parts and screws are made of high-quality stainless steel or ultra-hard polyamide 6. This plastic is food compatible and resistant to acids, alkalis and oils. Water is also unable to damage it, for the polyamide 6 used does not swell. Compared to stainless steel, the plastic has the advantage of a substantially lower weight.

For further details, please contact Brian Goodban:

BMG Technologies Ltd

Little Horwood
MK17 0PE

Tel: +44 (0)1296 715576
Fax: +44 (0)1296 714790 are not responsible for the content of submitted or externally produced articles and images.
Click here to email PandCT about any errors or omissions contained within this article.
Send this page
To send this page to a colleague or friend,
fill in the email addresses below...
Your email address
Their email address:
Page to be sent: shownews.asp?ID=36778

Company gateway pages
for BMG Technologies Ltd:
FREE Information on the products in this article
To request more information from this supplier,
fill in your email address below.
Your email address
Bookmark and Share
Product categories: Accelerometers | Actuators | Agitators | Analysers | Bearings | Compressors | Controllers | Conveyors | Drives | Enclosures | Flowmeters | Heat Exchangers | Motors | Pumps | Relays | Sensors | Transducers | Transmitters | Valves | Weighing
(c) Copyright 1999-2020 Process and Control Today Ltd  |  Reg. no 3733110  |  Email Editor  |  Email Webmaster  |  Sitemap  |  Privacy Policy