Thursday 9/4/2020

Bookmark and Share
 
 
Product Focus
  PandCT RSS Product Focus feed
Bioplastic Hand Held Enclosures From Stock!

15 August 2013

The SOFT-CASE series of hand held enclosures from OKW is now available from stock manufactured in BIOGRADE® bioplastic material. For most applications this bioplastic is suitable as a replacement for the existing fossil plastics, such as ABS, which has been used until now.

BIOGRADE® is CO2 neutral, technically compostable and biodegradable, and has similar mechanical and physical properties to ABS. Electronics design engineers can now ensure genuinely green credentials for their electronics by using an off-the-shelf biodegradable housing.

The SOFT-CASE enclosures are available in four standard sizes with external dimensions ranging from 51 x 82 x 14 to 92 x 150 x 28 mm. Typical applications include modern high value electronic devices such as portable instruments, medical and wellness devices, mobile data logging and data capture equipment.


Uniquely for handheld enclosures, the design is suitable for wide format displays and keypads. The top of the enclosure has a wide recessed area for locating an LCD or membrane keypad, and a raised panel on the long edge can be used for mounting USB, power or serial connectors and controls.

The three larger size cases are available with battery compartments for fitting 1.5V AAA, 1.5V AA or 9V cells.

Screw pillars are provided on the inside of the top and base parts for fitting PCBs, and the cases are assembled by four self-tapping screws. Prices start at £8.

Accessories include intermediate ring mouldings which increase the internal height, belt and pocket clips, tilt feet, wall mounting clips, and battery cradles and contacts.

Customising options for SOFT-CASE include CNC milling and drilling of holes and cut outs, silk-screen and tampo printing of legends and logos, EMC shielding and assembly of components.

More information on these enclosures can be found on OKW’s website at www.okw.co.uk
PandCT.com are not responsible for the content of submitted or externally produced articles and images.
Click here to email PandCT about any errors or omissions contained within this article.
     
Send this page
To send this page to a colleague or friend,
fill in the email addresses below...
Your email address
Their email address:
Page to be sent: shownews.asp?ID=37839

Company gateway pages
for OKW Enclosures Ltd:
FREE Information on the products in this article
To request more information from this supplier,
fill in your email address below.
Your email address
 
     
Bookmark and Share
Product categories: Accelerometers | Actuators | Agitators | Analysers | Bearings | Compressors | Controllers | Conveyors | Drives | Enclosures | Flowmeters | Heat Exchangers | Motors | Pumps | Relays | Sensors | Transducers | Transmitters | Valves | Weighing
(c) Copyright 1999-2020 Process and Control Today Ltd  |  Reg. no 3733110  |  Email Editor  |  Email Webmaster  |  Sitemap  |  Privacy Policy