Monday 9/12/2019

Bookmark and Share
 
 
Product Focus
  PandCT RSS Product Focus feed
Cat Pumps introduces the 700 series

21 January 2014

Cat Pumps has announced enhancements to one of its 345 bar high pressure pumps used extensively for pressure testing, heavy-duty pressure washing including graffiti removal and in industrial processes.

With the introduction of the new Model 700, the existing Model 70 pump has been upgraded to include a new pump head with a revised valve arrangement. Cat Pumps calls call this design 'stacked valves' because the discharge valves are installed directly above the inlet valves in a common bore. This simplifies valve servicing as the design now only has 3 valve plugs. 

Consequently there is a new Valve Kit for the Model 700, which contains all six valves so only one kit is required per pump. The high and low pressure seals are identical to those used for many years in the Model 70, but there is a new Seal Kit containing these and all the associated parts needed to service the pump seals.

The drive end of the new Model 700 Model is directly interchangeable with the Model 70 and most service items are identical. Note however that the plunger rod has been changed to eliminate the need for the plunger spacer.

The performance of the pump remains unchanged at 17 L/min at 1,700 rpm and being a true positive displacement pump, the flow remains directly proportional to speed right up to the maximum pressure rating of 345 bar (5,000 psi).

The Model 700 is available from stock now, and can be purchased bare-shaft, mounted directly to a suitable electric motor or base-plate mounted with motor and speed-reducing transmission. It is also available as model 700G1 complete with integrated gearbox to mount on a petrol or diesel engine with a standard SAE mounting face and 1" (25.4 mm) diameter parallel crankshaft extension.

For more information, please contact:

Brian Hubbard
Cat Pumps (UK) Limited
1, Fleet Business Park
Sandy Lane
Church Crookham
FLEET
Hampshire
GU52 8BF
Tel:  +44 1252 622031
Email: sales@catpumps.co.uk
Web:  www.catpumps.co.uk
PandCT.com are not responsible for the content of submitted or externally produced articles and images.
Click here to email PandCT about any errors or omissions contained within this article.
     
Send this page
To send this page to a colleague or friend,
fill in the email addresses below...
Your email address
Their email address:
Page to be sent: shownews.asp?ID=39475

Company gateway pages
for Cat Pumps UK Ltd:
FREE Information on the products in this article
To request more information from this supplier,
fill in your email address below.
Your email address
 
     
Bookmark and Share
Product categories: Accelerometers | Actuators | Agitators | Analysers | Bearings | Compressors | Controllers | Conveyors | Drives | Enclosures | Flowmeters | Heat Exchangers | Motors | Pumps | Relays | Sensors | Transducers | Transmitters | Valves | Weighing
(c) Copyright 1999-2019 Process and Control Today Ltd  |  Reg. no 3733110  |  Email Editor  |  Email Webmaster  |  Sitemap  |  Privacy Policy