Friday 18/10/2019

Bookmark and Share
 
 
Product Focus
  PandCT RSS Product Focus feed
PRECISION DIGITAL ANNOUNCES VANTAGEVIEW SERIES OF NEMA 4X, FIELD-MOUNTED METERS

21 January 2014

Precision Digital, global leader in digital panel meters and control instrumentation, today announced the Vantageview Series of NEMA 4X Field-Mounted Meters. The Vantageview Series offers the functionality and features of the company's ProtEX Series of Explosion-Proof Meters in an injection-molded plastic, NEMA 4X (IP65) enclosure. Vantageview meters are designed for use in demanding applications in wet or dirty environments that do not require agency approvals. They can be used for virtually any industrial process that involves level, flow, pressure, or temperature. Unique SafeTouch® through-window buttons allow operation without removing the cover. They are available in 4-20 mA loop-powered and pulse input models powered by the output loop, DC, or battery.

The Vantageview Series includes large, dual-line displays for viewing critical process variables clearly at a distance, even in direct sunlight. Models are available for single process variables, rate and total, feet and inches displays for level applications, and a larger one-inch display for long-range visibility. Each meter features a sleek, modern, polycarbonate enclosure with built-in mounting flanges and a rear groove for sturdy wall or pipe mounting; the integrated tamper seal loop tab allows for an additional layer of security. The meters also provide three 3/4 inch NPT threaded conduit holes for easy wiring in any direction and include two plastic conduit plugs. Operating and storage temperatures range from -40 to 75 degrees Celsius.

Programming and operation of the meters can be done without opening the housing, using the built-in SafeTouch® through-window buttons. Each meter is equipped with up to four sensors that operate as through-window buttons so the unit can be programmed and operated without removing the cover (and exposing the electronics) in harsh environments. These buttons can be disabled for security with a switch located inside the enclosure. When the cover is removed, the mechanical buttons located on the faceplate are used for programming. The clear, impact-resistant polycarbonate window makes the Vantageview meters ideal for applications where restrictions on glass exist, such as food production.

For more information please contact:

Jeffrey Peters
President
Precision Digital Corporation
89 October Hill Road
Suite 5
Holliston,
MA 01746-1378
Tel:  + 1 508-655-7300
Email: jpeters@predig.com
Web:  www.predig.com
PandCT.com are not responsible for the content of submitted or externally produced articles and images.
Click here to email PandCT about any errors or omissions contained within this article.
     
Send this page
To send this page to a colleague or friend,
fill in the email addresses below...
Your email address
Their email address:
Page to be sent: shownews.asp?ID=39478

Company gateway pages
for Precision Digital Corporation:
FREE Information on the products in this article
To request more information from this supplier,
fill in your email address below.
Your email address
 
     
Bookmark and Share
Product categories: Accelerometers | Actuators | Agitators | Analysers | Bearings | Compressors | Controllers | Conveyors | Drives | Enclosures | Flowmeters | Heat Exchangers | Motors | Pumps | Relays | Sensors | Transducers | Transmitters | Valves | Weighing
(c) Copyright 1999-2019 Process and Control Today Ltd  |  Reg. no 3733110  |  Email Editor  |  Email Webmaster  |  Sitemap  |  Privacy Policy