Sunday 12/7/2020

Bookmark and Share
 
 
Product Focus
  PandCT RSS Product Focus feed
NORGREN INTRODUCES SAFER SOLUTION FOR INFLATABLE HOSE FILLING

21 January 2014

Norgren, a global market leader in fluid control technology, has launched a new control unit that offers a safer and faster solution for inflatable hose filling in bulk materials handling operations. Designed to deliver Engineering Advantage for the food and beverage sector, the control unit also has scope for use in other industries.

The traditional method adopted in bulk material handling for isolating the filling neck from the environment is to inflate a rubber hose, sealing the area from the external surroundings. These hoses tend to be expensive and prone to over pressurising, causing production failures.

Norgren’s new control unit is suitable for use with all industrial compressed air systems, the all-pneumatic unit is intrinsically safe, with no electrical or PLC control needed, and can be used in ATEX zones. Compared with alternatives, which operate at up to 6 bar, it operates at pressures between 0.15 and 0.3 bar, reducing the risk of damage to hoses from excess pressure and delivering faster, more consistent performance with high accuracy.

A simplified design, with a lower component count, adds to the reliability of the unit which is easy to mount onto a control panel. Pressure adjustment is fast and easy using the regulator and pressure gauge and the unit can be used with a wide range of inflatable hose sizes. 

Units are available for dealing with single or multiple hose sizes and there is also a version that enables users to switch remotely between two sizes of inflatable hose used on the same machine via remote control. Accessories include a quick exhaust and safety valve unit, a non-return valve, an aluminium banjo bolt and additional air tank.

The system is suitable for use in a range of filling tasks, from plastic and paper bag to keg film and container filling.

Dave Whelan of Norgren commented: “Safety is paramount when handling and processing large volumes of powdered product as there can be a real danger of explosion. With electrical systems there is always the risk of a spark, but our pneumatic solution negates this risk and allows for more rapid and accurate filling too.”

For further information, please visit: www.norgren.com/uk/foodandbeverage.
PandCT.com are not responsible for the content of submitted or externally produced articles and images.
Click here to email PandCT about any errors or omissions contained within this article.
     
Send this page
To send this page to a colleague or friend,
fill in the email addresses below...
Your email address
Their email address:
Page to be sent: shownews.asp?ID=39484

Company gateway pages
for Norgren Limited:
FREE Information on the products in this article
To request more information from this supplier,
fill in your email address below.
Your email address
 
     
Bookmark and Share
Product categories: Accelerometers | Actuators | Agitators | Analysers | Bearings | Compressors | Controllers | Conveyors | Drives | Enclosures | Flowmeters | Heat Exchangers | Motors | Pumps | Relays | Sensors | Transducers | Transmitters | Valves | Weighing
(c) Copyright 1999-2020 Process and Control Today Ltd  |  Reg. no 3733110  |  Email Editor  |  Email Webmaster  |  Sitemap  |  Privacy Policy