Saturday 24/8/2019

Bookmark and Share
 
 
Product Focus
  PandCT RSS Product Focus feed
Split Roller Bearing design - Making the best choice

8 September 2014

Many businesses are focussing on reducing production costs, which includes maintenance time and lost production due to both routine and unplanned down time. By looking to make long term improvements, most production operations should certainly consider the total cost of ownership (TCO) as well as the short term benefits of reducing maintenance time where possible. In situations where large pieces of rotating equipment are in use, these savings can be achieved by introducing SRB split roller bearings.

Unlike solid bearings, SRB split roller bearings are totally split to the shaft; a design that both simplifies and expedites installation and significantly cuts downtime costs in comparison to replacing solid bearings of a similar size. SRB split roller bearings allow the shaft to be supported by the lower section of the bearing & housing whilst the upper section of the housing & the bearing outer race can be removed. This makes bearing inspection fast and simple, without the need to disconnect drives or lift the shaft. This intrinsic feature is especially valuable regarding large rotating machines, where sheer weight and size can be a barrier to fast and effective servicing.

Companies are increasingly embracing the fact that to achieve performance gains they must first achieve improved production efficiencies. To achieve these longer term efficiencies it may be more cost effective to specify components that initially cost a little more, but will reduce maintenance and repair costs during their long service life, therefore offering the customer a lower ‘whole life cost’ and reducing the total cost of ownership (TCO). It is the classic case where the component with the lowest initial price, often does not offer the customer the lowest lifetime cost.

Understanding the application and its maintenance requirements are crucial in making the best decision with regard to the design of the bearings used. In the first instance determining the type of load, axial or radial, is important to ensure that the correct design of bearing is selected, along with the sealing requirements and issues such as potential misalignment. Usually, for critical bearings in large rotating equipment, regular scheduled inspections are required, which can result in considerable periods of down time.

The installation design of the application and the ancillary equipment such as coupling design will also determine the amount of shaft movement that is allowable during a bearing replacement operation. Usually there is insufficient space to allow the shaft to be lifted and to remove the bearing housing without the requirement to dismantle large pieces of plant.

In some cases there may be insufficient space available to mount the lower half of the support pedestal during bearing replacement, unless the shaft itself can be lifted, so the maintenance time can be very protracted unless a more innovative design of split roller bearing support pedestal is available. Fortunately, Revolvo has designed a solution to solve this problem, the SRB SNQ (SN Quick) support pedestal which has a unique angled split design which solves this costly access issue, and therefore extends the split roller bearing advantages of long service life and reliability to new applications.

With SRB split roller bearings, the spherical location between the bearing housing and the support pedestal ensures that under conditions of shaft misalignment, and irrespective of the type of seal used, the seal always remains concentric to the shaft. As a result, SRB split roller bearings perform exceptionally well in harsh operating conditions (in some cases completely submerged) even with severe shaft misalignment, whereas solid mounted spherical roller bearings can suffer from non-concentric ineffective seals that can rapidly lead to expensive premature bearing failure.

The benefits that can be derived from installing SRB split roller bearings are clear, and often the key decision is to determine the correct design and seal arrangement for the application in question. Considering the potential savings that can be made, it is recommended to seek advice from Revolvo’s Technical Support Team, who has the experience and understanding of the issues influencing bearing selection, design & operation. Revolvo, the UK's leading manufacturer of split roller bearings, is also able to offer on-site bearing installation and commissioning support.

It is understandable that during the specification stages of a new project, an OEM may choose to make short term savings by specifying the most inexpensive bearing for the application. However it is important that the end-user considers whole life costs, specifically the cost of downtime for inspection, maintenance and replacement. Talking to Revolvo, the world's leading split roller bearing specialist will help you to understand the long term cost savings that are possible with most applications, and ensure that OEM machinery manufacturers select bearings that will be cost – effective in the longer term.

Click here to watch this video on YouTube

For more information, please contact:

Adrian Menzies
Revolvo Ltd
Unit 4
Yorks Park
Blowers Green Road
Dudley
West Midlands
DY2 8UL
UK
Tel:  +44 1384-245370 
Fax:  +44 1384-245371
Email: Adrian.Menzies@Revolvo.com
Web:  www.revolvo.com 
PandCT.com are not responsible for the content of submitted or externally produced articles and images.
Click here to email PandCT about any errors or omissions contained within this article.
     
Send this page
To send this page to a colleague or friend,
fill in the email addresses below...
Your email address
Their email address:
Page to be sent: shownews.asp?ID=41579

Company gateway pages
for Revolvo Ltd:
FREE Information on the products in this article
To request more information from this supplier,
fill in your email address below.
Your email address
 
     
Bookmark and Share
Product categories: Accelerometers | Actuators | Agitators | Analysers | Bearings | Compressors | Controllers | Conveyors | Drives | Enclosures | Flowmeters | Heat Exchangers | Motors | Pumps | Relays | Sensors | Transducers | Transmitters | Valves | Weighing
(c) Copyright 1999-2019 Process and Control Today Ltd  |  Reg. no 3733110  |  Email Editor  |  Email Webmaster  |  Sitemap  |  Privacy Policy