Saturday 25/5/2019

Bookmark and Share
 
 
Daily News
  PandCT RSS Daily News feed
NEL Invests £1m in UK’s Foremost High Pressure Calibration Facility

3 July 2015

NEL is investing £1million to create the UK’s only flow meter calibration facility capable of testing at significantly elevated pressures and temperatures.

This new test loop will reduce oil and gas operators’ financial exposure by performing meter calibrations closer to actual service conditions. By more accurately reflecting the increasing temperatures and pressures at which flow meters must operate, the uncertainty of meters deployed in the field will be minimised significantly.

Douglas Griffin, Head of Petroleum Measurement & Allocation at the Oil & Gas Authority, said: “Both equipment manufacturers and operators face significant flow measurement challenges, with elevated temperatures and pressures causing a substantial gap between calibration and actual service conditions.”

The pressure capability of NEL’s high pressure/high operating temperature liquid flow loop will increase from 5 bar maximum capability to 100 bar, with its ability to deal with higher temperatures increasing from 400C maximum capability to 800C. The new facility will be fully operational during quarter three.

NEL’s Flow Facilities are already widely recognised as one of the best in the world and are the primary flow measurement standard for the UK, under the UK’s National Measurement System (NMS)*.

Dr Phil Mark, Group Manager, NEL said: “NEL’s investment means that the UK is leading the improvement of flow meter performance in ever more challenging operating conditions. NEL’s new high pressure/high operating temperature liquid flow loop fills the gap between calibration and service conditions, allowing manufacturers to prove the performance of their meters, while operators and taxation authorities can be assured of more accurate fiscal measures.

“The findings from a recent Joint Industry Project, co-ordinated by NEL, into the effect of changing temperature and pressure on Coriolis meter performance was a principal driver,” concluded Dr Mark.

For more information, please visit: www.tuvnel.com
PandCT.com are not responsible for the content of submitted or externally produced articles and images.
Click here to email PandCT about any errors or omissions contained within this article.
     
Send this page
To send this page to a colleague or friend,
fill in the email addresses below...
Your email address
Their email address:
Page to be sent: shownews.asp?ID=43896

Company gateway pages
for NEL (TUV SUD Ltd):
FREE Information on the products in this article
To request more information,
fill in your email address below.
Your email address
 
     
Bookmark and Share
Product categories: Accelerometers | Actuators | Agitators | Analysers | Bearings | Compressors | Controllers | Conveyors | Drives | Enclosures | Flowmeters | Heat Exchangers | Motors | Pumps | Relays | Sensors | Transducers | Transmitters | Valves | Weighing
(c) Copyright 1999-2019 Process and Control Today Ltd  |  Reg. no 3733110  |  Email Editor  |  Email Webmaster  |  Sitemap  |  Privacy Policy