Thursday 2/4/2020

Bookmark and Share
Case Studies
  PandCT RSS Case Studies feed
ABB supports Adams Enclosures’ ambitious type testing programme

1 December 2015

Manufacturer of enclosures and busbar systems Adams Enclosures has completed an ambitious programme of type testing and certification for a total of 33 low voltage devices, including ABB’s new Emax 2 Air Circuit Breakers.

As a manufacturer of enclosures, Adams creates sheet metal enclosures and busbar systems that will house switchboards, power distribution boards, MCCs, electrical control panels and servers in data centres. Since being established in 2006, Adams has grown fast, recently moving to new larger premises in Walsall and using the extra space to bring more manufacturing operations in house, including powder coating.

In late 2013 the firm set about an ambitious programme to type test its enclosures to IEC 61439-2, which was introduced to cover low voltage switchboards and is a significant step forward from the previous IEC 60439 standard.

The new standard covers low voltage switchgear and its enclosure as a package. By completing a rigorous schedule of type testing, Adams is able to offer certified switchgear panels that meet the new standard for end customers, which are organisations that require a lot of power and automation, typically water companies, data centres, food factories and automotive manufacturers.

Simon Banks, Adams’ Technical Sales Manager, who led the testing programme said: “ASTA Type Testing provides evidence to panel builders and end customers that our panels comply with current standards. It gives buyers the confidence in the design and construction of a panel, which in turn means that they can operate with confidence.

“As a relatively young company, we set about the testing programme to catch up with the capabilities of other enclosures manufactures and to establish ourselves as a manufacturer that can meet customer needs. Plus, carrying out an in-depth testing programme at the same time that the old standard was superseded will make the most of our investment in the long term. That’s why we took the unusual decision to deliver a testing programme for 10 air circuit breakers and a further 23 moulded case circuit breakers and fuse switches.

“The new standard called for a lot of testing to demonstrate that Adams’ enclosure and busbar systems meet the new standard’s requirements. This means that we can provide certified busbar systems that can withstand 50 or 80 kA fault current and operate within temperature rise limits defined within the standard.

“Type testing is a major investment, both in time and materials as well as transportation between our facility and the testing sites. We’ve installed the panels in our workshop as a visible reminder of the scope of our type testing programme and are available for customers to come and view the products tested.”

Adams’ programme of short circuit testing was carried out at in Europe, whilst temperature rise testing was completed in the UK.

Simon continued: “We were keen to meet the changing demands of the market and take advantage of being one of the first enclosure manufacturers to offer certified panels fitted with ABB’s new Emax 2 low voltage circuit breaker. Although it’s ultimately up to the panel builder or client to prove the final certification for the board, having the testing of the circuit breaker and enclosure in place is a major step forward. Functional testing of the switchboard is down to them.

Adams’ testing programme was ambitious and included a total of 33 devices from a number of manufacturers, including the full range of new Emax2 Air Circuit Breakers of ABB.

In total the programme took 10 months of effort led by Simon, with input from Adam’s MD Wayne Adams plus support from the firm’s engineers and fitter, as well as support from component manufacturers including ABB, which supplied its Emax 2 units free of charge for the testing programme, as well as advice from its engineers.

To accommodate the devices, Simon oversaw the design and construction of four panels, which would be tested to their ultimate limits during the test process, when panel’s performance is repeatedly tested against the full fault current for one second. Although Adams has the capability to manufacture large bespoke panels, they have created standard designs so that they can produce popular panel designs as standard modules, freeing up its team of engineers to focus on the more specialist and unusual orders

Temperature rise testing took more than a week for the most complex of the boards, followed by short circuit testing. During the tests, panel assemblies made up of the enclosure, circuit breaker and busbar must work reliably and temperature rise must be limited to the values defined in the BSEN 61439 standard and withstand the short circuit full fault currents for one second. Short circuit withstand tests with 3 second duration have also been carried out on busbar systems.

Commenting on the testing programme, Simon said: “It was an unusually large testing programme and was hard work at the test facilities. The challenges in the test laboratories were on the temperature rise testing. This was because we had a total of 23 devices on the first panel, all with different current ratings, which made it difficult to balance the current flow through the board so we were pleased to complete the testing on schedule and Emax2 handled the temperatures with ease.

“While the preparation work and testing was a significant effort, it has put us in a good position with respect to the competition. It’s rare to have such a large test programme in a single year but it means that we are in a strong market position and have access to new markets.

The bulk of the testing programme has now been completed and Adams can now supply enclosures fitted with the Emax 2 as part of a type tested enclosure.

Simon concluded: “Overall ABB has been very supportive and their technical assistance has been a corner stone in our design and testing.”

Completing the testing in early 2015 means that Adams is ready to fulfil customer orders from the various industry segments such as water, solar, rail, building services, where it foresees robust demand for the new Emax2 switchgear.

Reeve Carter, National Sales Manager of Low Voltage Division for ABB, in UK, said: “Type testing is not only essential due to the new standards, but also to support customers with the new technology products and pass on the benefits of the many features incorporated in the new Emax2 Air Circuit Breaker, from its cost reducing switchboard foot print to its ability to analyse networks right to the 50th Harmonic. It is a major investment by enclosures manufacturers and that’s why ABB is happy to support this initiative.”

For more information, please contact:

David Watton
Marketing & Communications Manager
ABB Low Voltage Products Division UK
Tower Court
Foleshill Enterprise Park
Tel:  +44 (0)7880 557 171
Web: are not responsible for the content of submitted or externally produced articles and images.
Click here to email PandCT about any errors or omissions contained within this article.
Send this page
To send this page to a colleague or friend,
fill in the email addresses below...
Your email address
Their email address:
Page to be sent: shownews.asp?ID=44981

Company gateway pages
for ABB Low Voltage Products and Systems:
FREE Information on the products in this article
To request more information from this supplier,
fill in your email address below.
Your email address
Bookmark and Share
Product categories: Accelerometers | Actuators | Agitators | Analysers | Bearings | Compressors | Controllers | Conveyors | Drives | Enclosures | Flowmeters | Heat Exchangers | Motors | Pumps | Relays | Sensors | Transducers | Transmitters | Valves | Weighing
(c) Copyright 1999-2020 Process and Control Today Ltd  |  Reg. no 3733110  |  Email Editor  |  Email Webmaster  |  Sitemap  |  Privacy Policy