Saturday 8/8/2020

Bookmark and Share
Daily News
  PandCT RSS Daily News feed
Watch dogs ensure compliance with the fire and explosive environments regulations

12 February 2016

"A watched pot never boils" is a common idiom in the UK. It means if you concentrate on something happening, the wait will seem longer than if you distracted yourself with other matters. But if the boiling was a bad thing, you'd obviously keep a diligent watch wouldn't you? Here Global Heat Transfer's CEO, Clive Jones, talks about the best way to ensure compliance with the fire and explosive environments regulations. 

The Dangerous Substances and Explosive Atmospheres Regulations (DSEAR) of 2002 and the Explosive Atmosphere Directive (ATEX 137) are mandatory requirements for minimising safety risks and protecting workers from fire and explosion where flammable or explosive materials are present.

The use and storage of heat transfer fluids is covered by DSEAR. Many industries, from oil and gas to food and beverage face risk of closure, should they be found in serious breach of regulations.

Like looking after yourself, the best way to care for a plant - and therefore ensure DSEAR compliance - is to take a proactive maintenance approach. Regular check-ups are the key to spotting dangers.

Unfortunately, when it comes to heat transfer systems, it's often a case of out of sight and out of mind. Thermal fluid is often neglected until it's degraded so much that it causes issues in the system such as reduced fire and flash point and carbon build-up. These can lead to a reduction in efficiency, increased energy costs, pipe blockages and pump issues – ultimately resulting in possible fire and explosion risks.

As thermal oils age within a system, they degrade and crack producing contaminates, solids and volatiles and carbon. If left untreated, these deposits bake onto the inside of the system. Carbon is an excellent insulator and, if residue builds up around the heater coil, can create hot spots that can burn through thick metal pipes, causing fire and explosion risk, or at the very least reducing efficiency.

Most heat transfer applications have an incredibly high internal temperature in which the oils operate. Extreme examples can be found in the solar, plastics production and chemical industries, where thermal fluids need to work effectively up to a whopping 400 degrees Celsius and beyond. Even a small hole in the metal pipes of a system containing thermal fluids at these temperatures means the plant runs a severe fire risk.

The best way to comply with DSEAR regulations and keep your plant, employees and business safe is to take a proactive approach to thermal fluid maintenance. You wouldn't leave a frying pan unattended at home would you, so why ignore your heat transfer system?

Carrying out checks every month to ensure both the fluid and the system are in optimal condition reduces the risk of downtime and damage to applications, while ensuring safety and DSEAR compliance. Overall, by committing to regular and relevant representative testing and monitoring carried out by a qualified company, you could reduce costs by up 75 per cent, but the peace of mind you'll receive from knowing your system and staff aren't at risk is invaluable.

If you'd like to know how you can take a load off your mind by getting Global Heat Transfer to watch your proverbial pot, read more about its fluid lifecycle management plan Thermocare, here

For more information, please contact:

Caroline Law
Global Heat Transfer Ltd
The Global Group of Companies
Cold Meece Estate
Cold Meece
ST15 0SP
Tel:  +44 1785 760555
Fax:  +44 1785 760444
Web: are not responsible for the content of submitted or externally produced articles and images.
Click here to email PandCT about any errors or omissions contained within this article.
Send this page
To send this page to a colleague or friend,
fill in the email addresses below...
Your email address
Their email address:
Page to be sent: shownews.asp?ID=45490

Company gateway pages
for Global Heat Transfer Ltd:
FREE Information on the products in this article
To request more information,
fill in your email address below.
Your email address
Bookmark and Share
Product categories: Accelerometers | Actuators | Agitators | Analysers | Bearings | Compressors | Controllers | Conveyors | Drives | Enclosures | Flowmeters | Heat Exchangers | Motors | Pumps | Relays | Sensors | Transducers | Transmitters | Valves | Weighing
(c) Copyright 1999-2020 Process and Control Today Ltd  |  Reg. no 3733110  |  Email Editor  |  Email Webmaster  |  Sitemap  |  Privacy Policy