Saturday 22/7/2017

Bookmark and Share
 
 
Case Studies
  PandCT RSS Case Studies feed
Abattoir Adopts Triark Pumps for Biological Solution

12 July 2017

Essex based Triark was recently approached by a leading abattoir to supply pumps that could assist in the creation of a biological approach to the discarding of waste.

The owner of the site wanted to stop pumping waste material straight into collection tanks and try to do something a little more eco-friendly.

Following a site visit by Triark engineers, and lengthy discussions about what was physically, but also practically possible, it was determined that all the waste material – liquids and solids - would be pumped into a sequence of 'pits’ or cesspools. The addition of water, aeriation and filtration by reed beds, would allow a natural breakdown of the material so that eventually a PH neutral fluid could be rendered.

The waste material is a combination or all things you would expect to find in a slaughterhouse - teeth, bones, fur and fat - including animal effluent from the holding areas, but the solution to its treatment and eventual removal from site was really quite simple.

Having first been filtered through a crude yet functional system whereby grates catch anything that won’t breakdown thereafter, the remaining waste is pumped into the first pit. Water is then added and the pit is constantly aerated, so that Mother Nature can take her course, organically and biologically breaking down the material.

A second pump then shifts the surface fluid into the next pit where continuous PH monitoring takes place, and once the required levels are achieved, the fluid is then moved on to a ‘reed’ bed.

This third pit is the final resting place where a combination of circulation, aeration and filtration by the reeds creates the PH neutral fluid which can then be pumped into the sewerage system or back into the second pit if more liquid and aeration is required.

Of course with one of the main requirements being the need to keep everything moving at all times, the overall energy consumption was another key consideration in the provision of an eco-friendly solution. With this in mind, the pumps selected for the task were 230v single phase ABS Piranha lightweight cutter pumps and DAB FEKA sewerage pumps. 

Commenting on the project, Triark’s Managing Director, David Rozée said, ‘Although a somewhat unique enquiry, we were delighted to be able to use the experience gained through our work on other unusual projects and help to deliver the required solution.’

For more information, please contact:

Ablah Williams
Triark Pumps Ltd
The Sail Loft
Burnham Business Park
Burnham-on-Crouch
Essex
CM0 8TE
Tel:  +44 1621 781144
Email: ablah@tri-ark.com
Web:  www.tri-ark.com
PandCT.com are not responsible for the content of submitted or externally produced articles and images.
Click here to email PandCT about any errors or omissions contained within this article.
     
Send this page
To send this page to a colleague or friend,
fill in the email addresses below...
Your email address
Their email address:
Page to be sent: shownews.asp?ID=48992

Company gateway pages
for Triark Pumps Ltd:
FREE Information on the products in this article
To request more information from this supplier,
fill in your email address below.
Your email address
 
     
Bookmark and Share
Product categories: Accelerometers | Actuators | Agitators | Analysers | Bearings | Compressors | Controllers | Conveyors | Drives | Enclosures | Flowmeters | Heat Exchangers | Motors | Pumps | Relays | Sensors | Transducers | Transmitters | Valves | Weighing
(c) Copyright 1999-2017 Process and Control Today Ltd  |  Reg. no 3733110  |  Email Editor  |  Email Webmaster  |  Sitemap  |  Privacy Policy