Sunday 5/4/2020

Bookmark and Share
 
 
Product Focus
  PandCT RSS Product Focus feed
Pump Ink with Verderflex

27 September 2017

The Verderflex® Rapide is a range of industrial tube pumps that provide a balanced selection of simple to operate peristaltic pumps. The family offers the customers, choices that are compact, simple to use and require no tools during the tube change. The range has been developed to offer reliable and cost effective pumping solutions for industrial applications. Standard designs incorporate rugged aluminium pump heads with “thick-walled” tubing for increased suction lift and IP55 gear motors with both single and three phase options. The Verderflex® Rapide is an excellent, low flow dosing pump capable of handling viscous, abrasive and chemically aggressive media with total containment and leak free pumping.

Verderflex® Pump in Printing Process

In a printing process, where pumps are used to deliver inks to its printers, the pumps use considerable amount of compressed air and require constant maintenance due to the wearable parts like seals and valves. This could result in high repair and maintenance costs and higher and frequent down-times. In addition to this, these pumps are required to deliver shear sensitive inks to the printers without foaming or separation.

Advantages of the Rapide Tube Pump

- Compact and easy to use
- Can be integrated into third party equipment such as printing presses
- Designed for industrial environments including chemical, mining, printing and water treatment
- Can be used with variable frequency drives (VFDs)

After assessing the situation, a Verderflex R8 Peristaltic Hose pump was recommended. With a flow rate between 170 l/hr and 470 l/hr at 2Bar, the low maintenance Verderflex R8 was perfect for this application. This pump enables the customer to save both cost and time by having high dependability and only one wearing part – the hose. With a simple clamping mechanism enabling hose change, the pumps are easy to maintain on-site, without requiring specialist repairs. There are no seals or valves to replace, nor impellers that can become clogged.

Verderflex’s happy customers claim that Verderflex R8 is a “great pump and very reliable”. In addition to the benefits described above, customers were delighted that Verderflex® pumps also save money on ink during setup/cleaning between jobs by being reversible. They simply pump any unused ink back into the supply after the print job is finished.

For more information, please contact:

Verderflex
Unit 3 California Drive
Castleford
West Yorkshire
WF10 5QH
Tel:  +44 (0)1924 221 020
Email: info@verderflex.com
Web:  www.verderflex.com/en/
PandCT.com are not responsible for the content of submitted or externally produced articles and images.
Click here to email PandCT about any errors or omissions contained within this article.
     
Send this page
To send this page to a colleague or friend,
fill in the email addresses below...
Your email address
Their email address:
Page to be sent: shownews.asp?ID=49547

Company gateway pages
for Verderflex:
FREE Information on the products in this article
To request more information from this supplier,
fill in your email address below.
Your email address
 
     
Bookmark and Share
Product categories: Accelerometers | Actuators | Agitators | Analysers | Bearings | Compressors | Controllers | Conveyors | Drives | Enclosures | Flowmeters | Heat Exchangers | Motors | Pumps | Relays | Sensors | Transducers | Transmitters | Valves | Weighing
(c) Copyright 1999-2020 Process and Control Today Ltd  |  Reg. no 3733110  |  Email Editor  |  Email Webmaster  |  Sitemap  |  Privacy Policy