Friday 23/8/2019

Bookmark and Share
Daily News
  PandCT RSS Daily News feed
Detecting and fixing thermal fluid leaks

22 December 2017

We all know how serious information leaks can be for companies, governments and individuals. But did you know that thermal fluid leaks can be just as damaging for manufacturers? Here, Clive Jones, managing director of thermal fluid specialist, Global Heat Transfer, discusses the importance of detecting and fixing thermal fluid leaks in a heat transfer system.

It is important for plant managers operating, process, chemical, pharmaceutical or food facilities to stay on top of thermal fluid leaks. If left unattended, they can result in lack of compliance with regulation and health and safety risks. The plant manager can mitigate this by taking steps to detect leaks and fix them if they arise.

Smoke signals

One of the most recognisable signals of a thermal fluid leak is that it will often be accompanied by smoke. The amount of smoke visible, depends on the size of the leak, the temperature of the fluid and the ventilation in the surrounding area.

Smoke can be produced by leaks of all sizes, but what happens to this smoke depends on the situation at hand. During a small leak, smoke can leave dark stains or a carbon crust on the system. If the leak is larger, fluid will cool quickly as it hits the air. More serious health and safety risks can occur if ventilation is poor.

Plant managers can investigate the cause of smoke in their systems to assess whether there is a leak. If so, they should then take steps to fix it.


If the system is installed correctly, it is less likely to leak. Plant managers can safeguard their systems by installing it in an area with good air flow and insulation. 

Another step plant managers can take is to ensure isolation valves are installed throughout the system. That way, if a leak were to occur, the whole system wouldn’t need to be drained and downtime would be minimised.
Any weaker areas such as joins or flanges, where a leak could potentially occur, should also be fitted with guards to deflect any mist or spray from the leak. The plant manager should also ensure that all valves are installed with their stems facing sideways so that leaks can drip away from the pipes and the system.


Once the plant manager or specialist thermal fluid company has checked the system is installed correctly, regular testing is the next step to safeguard a system. Under the Dangerous Substances and Explosive Atmospheres Regulations (DSEAR), thermal fluid should be analysed regularly.

The reason thermal fluid sampling is so important is that thermal fluid degrades over time. The fluid can oxidise and degrade, leaving a solid carbon build up in pipes. If this occurs, carbon deposits can reduce heat transmission, restrict flow and lead to excessive wear of pumps, valves and seals, or worse still build up and create a hotspot, which can increase the risk of a leak.

Plant managers can avoid the negative consequences of thermal fluid degradation by performing regular, proactive maintenance and sampling as part of a lifecycle maintenance programme, such as Global Heat Transfer’s Thermocare.

Act fast

To keep health and safety risks to a minimum, thermal fluid leaks should always be dealt with quickly. Though a plant manager should have a spill kit on site, repairing a leak is a job best handled by the experts. Facilities managers can contact a thermal fluid specialist to deal with the leak and safeguard the system. After all, damage control is essential for information leaks just as it is with thermal fluid leaks.

For more information, please contact:

Caroline Law
Global Heat Transfer Ltd
The Global Group of Companies
Cold Meece Estate
Cold Meece
ST15 0SP
Tel:  +44 (0) 1785 760555
Fax:  +44 (0) 1785 760444
Web: are not responsible for the content of submitted or externally produced articles and images.
Click here to email PandCT about any errors or omissions contained within this article.
Send this page
To send this page to a colleague or friend,
fill in the email addresses below...
Your email address
Their email address:
Page to be sent: shownews.asp?ID=50179

Company gateway pages
for Global Heat Transfer Ltd:
FREE Information on the products in this article
To request more information,
fill in your email address below.
Your email address
Bookmark and Share
Product categories: Accelerometers | Actuators | Agitators | Analysers | Bearings | Compressors | Controllers | Conveyors | Drives | Enclosures | Flowmeters | Heat Exchangers | Motors | Pumps | Relays | Sensors | Transducers | Transmitters | Valves | Weighing
(c) Copyright 1999-2019 Process and Control Today Ltd  |  Reg. no 3733110  |  Email Editor  |  Email Webmaster  |  Sitemap  |  Privacy Policy