Sunday 20/1/2019

Bookmark and Share
 
 
Case Studies
  PandCT RSS Case Studies feed
Single-source solutions for breweries – from the water treatment via filling to wastewater disposal

31 December 2018

There is a lot going on in breweries: whether it’s supplying water for bottling, tank cleaning or wastewater disposal - transport of liquids is required. Pumps, measuring technology and agitators from Xylem are in their element here.

Reliable and energy efficient pumps are critical in breweries. If one of them needs an unscheduled service or even to be replaced, this will cause problems through-out the brewing process. Jabsco, Lowara and Flygt pumps from Xylem ensure high levels of operational reliability.

The Xylem pumps are already on duty when collecting and processing water from your own well. First class quality must be the main ingredient of the high grade beers. A lot of water is also needed for heating and cooling as well as for the CIP cleaning, even though brewers have drastically reduced the water consumption for these secondary processes.

Clean water without chemicals

Lowara’s borehole pumps bring water up from great depths. A Lowara e-NSC standard water pump can transport it to the water treatment plant. Thanks to its highly efficient hydraulics, the pump even surpasses the ErP2015 specifications. Gravel filters rid the well water of particles, and consistent quality brewing water is ensured by modern reverse osmosis technology. Lowara's highly reliable multi-stage e-SV centrifugal pump, which can be used as a single pressure pump or as a pressure booster, sends the water through the pressure pipes. Cleaned and softened without the harmful use of chemicals, the pump water enters a UV disinfection system with Wedeco technology, another Xylem brand. Some breweries are already benefitting from the latest model, the Spektron UV disinfection system. The flow guidance has been improved by the developers and because the UV output is always adjusted to the water quality and throughput via a control, the operating costs are particularly low. The quality of the water is monitored during and at the end of the cleaning process by WTW's online measuring technology, a company that also belongs to Xylem.

Retractable fittings for the pH probes, which can be used preconfigured, facilitate the work here. And at the end of the fresh water treatment, the multi-parameter system Multiline 1000 offers a comfortable measurement of six parameters simultaneously, as occurs in drinking water monitoring. WTW technology is also recommended for the brewery laboratory. As part of a so-called step control, a sample should be taken and analysed after each process step, such as pumping from the fermenter to the storage cellar, and of course immediately before bottling. This ensures the quality of each batch. The samples are then filtered and freed of carbon dioxide by heating, before pH, alcohol content, wort and many other values are determined.

Hygienically and without oxygen transfer into the brewhouse

Pumping the purified water into the brewhouse in the hot section of the brew-ery is done by a Lowara centrifugal pump. Several hygienic beer pumps from Xylem brands, such as centrifugal pumps from Jabsco, are in use there. EHEDG certified units are a must in this production process. In addition, the pumps must not introduce

oxygen into the process. Pumps that are suitable for CIP and SIP cleaning are the first choice in this hygienically demanding process. All components which come in contact with product are made of 1.4404 stainless steel. Even the high requirements of EC Regulation 1935/2014 can be met by Jabsco.

Various Jabsco stainless steel centrifugal pumps are used during wort boiling, for example for pumping the mash into the lauter tun and into the wort kettle. A type Hy-Line+, food-grade rotary lobe pump can take over the hop dosing as well as the pitching of the wort. It is easy to find the right connection variant since the pump series are modular.

“Pumps that are suitable for CIP and SIP cleaning are the first choice in this hygienically demanding process.”

Gentle without shearing force

The wort reaches the so-called whirlpool, in which hop residues, coagulated protein and other suspended matter are separated out, via a centrifugal pump again. Then it goes into the wort cooler before yeasts are pitched at relatively low temperatures. A good service is provided by the gentle conveying Hy-line+ rotary lobe pump, whose low shear stress is ideal for use with yeast. One of the Jabsco peristaltic pumps would be equally suitable.

Breweries use Jabsco food-grade rotary lobe pumps for delivery to the main fermentation tank. To pump the new beer, they use mobile Jabsco centrifugal pumps. After several weeks of storage, the beer is now filtered. If the brewer uses diatomaceous earth which is an extremely abrasive medium, Xylem recommends sliding ring seals made of silicon carbide (SiC) in the particularly gentle centrifugal pumps.

Twice used for product promotion and CIP cycle

Short-time heat treatment (STHT) preserves the portion of the beer to be canned. Lowara multistage high pressure pumps generate the necessary pressures in the boiler circuit. Jabso hydienic, frequency controlled pumps are used here to extract the beer as well as in the bottling plant. A rotary piston pump from Xylem, efficiently extracts products with a high gas content when used in conjunction with an upstream screw pre-stage, pays off particularly well because it can also be used for the CIP return, the brewery saves a pump. Pumps from the Xylem portfolio are used in the cleaning systems for bottles and barrels. Jabsco air-operated diaphragm pumps supply detergents. Standard pumps and high-pressure pumps as well as multistage Lowara centrifugal pumps are also used in there. In CIP applications, the Lowara e-series energy-saving centrifugal pumps with their efficient IE3 motors are particularly convenient. The drum and bottle fillers are also equipped with Xylem technology. The tunnel pasteurizer with heat exchanger connected to the bottle filler is supplied with fresh water and circulating water at different temperatures via Lowara centrifugal pumps.

Robust Flygt pumps for wastewater

The wastewater treatment plant closes the circle. Energy-efficient robust Flygt pumps are especially good for pumping waste and rain water. A ventilation system with Sanitaire aerators ensures sufficient oxygen supply, while infinitely variable Flygt submersible agitators support the biological process in the treatment by creating additional horizontal flow in the basin. The deposit-free and specifically shaped propellers offer very high thrust performance with low energy consumption, which means particularly high efficiency. A large number of WTW sensors for all wastewater parameters, together with the WTW-IQ-Sensor-Net, ensure a seamless monitoring process.


*Please note, not all of these products are available in the UK & Ireland but alternatives can be offered.

For more information, please visit: www.xylem.com
PandCT.com are not responsible for the content of submitted or externally produced articles and images.
Click here to email PandCT about any errors or omissions contained within this article.
     
Send this page
To send this page to a colleague or friend,
fill in the email addresses below...
Your email address
Their email address:
Page to be sent: shownews.asp?ID=52670

Company gateway pages
for Xylem Water Solutions UK (formerly ITT Flygt):
FREE Information on the products in this article
To request more information from this supplier,
fill in your email address below.
Your email address
 
     
Bookmark and Share
Product categories: Accelerometers | Actuators | Agitators | Analysers | Bearings | Compressors | Controllers | Conveyors | Drives | Enclosures | Flowmeters | Heat Exchangers | Motors | Pumps | Relays | Sensors | Transducers | Transmitters | Valves | Weighing
(c) Copyright 1999-2019 Process and Control Today Ltd  |  Reg. no 3733110  |  Email Editor  |  Email Webmaster  |  Sitemap  |  Privacy Policy