Wednesday 22/5/2019

Bookmark and Share
 
 
Case Studies
  PandCT RSS Case Studies feed
Stratus® ftServer® keeps Düsseldorf’s water supply running

18 April 2019

Ensuring sufficient high quality drinking water to meet the requirement of consumers requires absolute availability of a complex plant infrastructure at all times. When Düsseldorf Water Authority decided to review its infrastructure it considered hosting its control room servers on either cluster systems or fault tolerant servers.

Düsseldorf’s Water Authority provides water to over 600,000 residents. It operates from sites in Flehe, Am Staad and Holthausen. Each site contains extensive technical plant operations, all of which needs to be up and running at all times.

With wells, treatment plants, elevated tanks and pressure boosts and reducers in each location, the plant had been operated by programmable logic controllers since the 1990s. The system was controlled through a network of measuring devices with around 40,000 data points. If, for example, there was a leak in the distribution network, these devices could quickly locate it through any deviation from the required pressure readings. The information from the measuring and control devices from all three plants was then collated in the respective control rooms and the data archived. It was imperative, for legal, health and safety reasons, that this data was securely stored—and remained safely stored and permanently updated during any technology migration projects.

The control rooms at each location had an IT-assisted SCADA (Supervisory Control and Data Acquisition) control system. These systems collected information and put it into graphical form, so that service personnel could make quick adjustments to the waterworks. However, the fully automated control system meant that service personnel usually only had to monitor the process rather than make manual adjustments. The water authority did not want this to change.

The over-riding need was to find a hosting solution that could guarantee absolute availability of the system at all times, with absolutely no interruption to service or data collection whatsoever.

Doing so in a way that enabled Düsseldorf Water Authority to keep its existing infrastructure in place, without the need to train or bring in IT expertise was also important.

After much consideration, Düsseldorf’s Water Authority decided to replace two database servers and the central domain controller with Stratus ftServers. These servers have redundant hardware in one physical machine. Each component is doubled—CPU, RAM, IO units and the hard disk—and each of these operate totally in sync. So, should one component fail, its partner component continues to operate and an automatic message is sent to Stratus, ensuring a replacement component is dispatched immediately. There is no system down time, no loss of data and no need to restart the machine.

Furthermore, the failed part, which Stratus automatically sends, can be replaced while the machine continues to run and synchronises itself automatically with the system. The failure does not require any action by the administrator. There is no need for training or internal expertise.
“We evaluated a cluster system too, but not for long. Cluster systems are complicated to install and have a higher administration cost,” advises Heiko Jepp, team leader in the water mechanics department at Düsseldorf Water Authority.

“It soon became obvious that it wouldn’t have been an acceptable solution for us. The fault-tolerant servers are different in that no adjustments to the existing software are necessary; the redundant components operate as a single system, while, as a rule, applications in a cluster system need adapting,” he adds. Düsseldorf Water Authority has also been able to continue to use its Wonderware data-processing software without any changes.
“The fact that we still only need one licence to use it on our new servers, unlike a cluster, is a positive side effect of high availability,” explains Jepp.

“This offset the higher acquisition cost of a fault-tolerant system, so both options were identical from a cost point of view. The higher availability and the easy administration were crucial in our decision in favour of Stratus ftServer,” he concludes.

For more information, please visit: www.stratus.com
PandCT.com are not responsible for the content of submitted or externally produced articles and images.
Click here to email PandCT about any errors or omissions contained within this article.
     
Send this page
To send this page to a colleague or friend,
fill in the email addresses below...
Your email address
Their email address:
Page to be sent: shownews.asp?ID=53347

Company gateway pages
for Stratus Technologies Systems Ltd:
FREE Information on the products in this article
To request more information from this supplier,
fill in your email address below.
Your email address
 
     
Bookmark and Share
Product categories: Accelerometers | Actuators | Agitators | Analysers | Bearings | Compressors | Controllers | Conveyors | Drives | Enclosures | Flowmeters | Heat Exchangers | Motors | Pumps | Relays | Sensors | Transducers | Transmitters | Valves | Weighing
(c) Copyright 1999-2019 Process and Control Today Ltd  |  Reg. no 3733110  |  Email Editor  |  Email Webmaster  |  Sitemap  |  Privacy Policy