Sunday 15/12/2019

Bookmark and Share
 
 
Product Focus
  PandCT RSS Product Focus feed
New filters and carbon towers from Atlas Copco set high standard in risk prevention

15 May 2019

Atlas Copco has introduced several new high-flow filters and activated carbon towers that offer the highest possible standards in preventing dust and oil contamination within oil-injected air compressors and air treatment systems.

Marine standards

The two new 16 Bar aluminum twin filter models, named UD 850T and UD 1100T, can be used in numerous applications and industries – even in challenging marine environments.

Building on the existing aluminum filter line up to 2000 Nm³/h, they offer high flow filtration solutions of 3000 Nm³/h and 4000 Nm³/h respectively; at reference conditions of 7 Bar.

The new filters are ISO12500-1 verified. This applies to all patented UD grade oil coalescing filters, which replace two traditional 1 micron and 0.1 micron coalescing filters with one single filter offering the same filtration rate at 40 per cent less pressure drop.

Optimal risk prevention control

The existing QDT carbon tower range is expanded with five new 16 Bar fabricated vessels. The combination of the QDT activated carbon towers and the new twin filter UD+ type pre-filter and PDp type post filter offers optimal control to prevent the risk of oil and dust contamination.

When combined with GA oil-injected compressors, they guarantee ISO8573-2010 class 1 0.01mg/m³ oil content and class 1 particle content – which makes them a reliable alternative to the Atlas Copco Class 0 compressor portfolio.

With service intervals of either 8000 or 12000 hours and suitable for flows between 1500 and 6500 Nm³/h, the QDT range now matches the entire compressor range up to 750 kW.

For more information, please contact:

Atlas Copco Ltd
Swallowdale Lane
Hemel Hempstead
Swallowdale Lane
Hemmel Hempstead
England
Tel:  +44 (0) 1442 261201
Fax:  +44 (0) 1442 234791
Email: gba.info@uk.atlascopco.com
Web:  www.atlascopco.co.uk
PandCT.com are not responsible for the content of submitted or externally produced articles and images.
Click here to email PandCT about any errors or omissions contained within this article.
     
Send this page
To send this page to a colleague or friend,
fill in the email addresses below...
Your email address
Their email address:
Page to be sent: shownews.asp?ID=53499

Company gateway pages
for Atlas Copco Ltd:
FREE Information on the products in this article
To request more information from this supplier,
fill in your email address below.
Your email address
 
     
Bookmark and Share
Product categories: Accelerometers | Actuators | Agitators | Analysers | Bearings | Compressors | Controllers | Conveyors | Drives | Enclosures | Flowmeters | Heat Exchangers | Motors | Pumps | Relays | Sensors | Transducers | Transmitters | Valves | Weighing
(c) Copyright 1999-2019 Process and Control Today Ltd  |  Reg. no 3733110  |  Email Editor  |  Email Webmaster  |  Sitemap  |  Privacy Policy