Sunday 23/2/2020

Bookmark and Share
 
 
Daily News
  PandCT RSS Daily News feed
Porvair Filtration Launches its 2020 Filtration Catalogue

13 February 2020

Porvair is delighted to launch its 2020 Filtration Catalogue, featuring an extensive range of products.

The new catalogue highlights Porvair’s continuous dedication to finding new ways to fulfil customers’ filtration requirements and to develop new products for the markets they serve.

The catalogue features a number of new products, including an expanded range of compressed air products, microfiltration cartridges suitable for high-purity applications and Septa filter elements for the nuclear industry.

The complete list of additional products is as follows:

1.    Septa filter elements

Manufactured from 316L stainless steel, these septa can be retrofitted into existing applications. All of our septa filter elements are designed and tested to exceed the industry standards for resin retention, mechanical integrity, pre-coatability and backwash efficiency, to extend run times and maximize ion exchange performance.

2.    Radial flow HEPA inserts

We manufacture fully compliant radial flow filter inserts for nuclear ventilation applications, qualified to and validated for, all UK nuclear HVAC standards. These HEPA-rated glass fibre pleated filter inserts offer fine levels of filtration efficiency and low differential pressure.

3.    Tekfil™ N

TekfilTM N is a high flow, graded depth filter with high contaminant capacity for long life. Constructed from FDA approved polypropylene with excellent performance characteristics, it is an economic choice for a wide range of applications.

4.    Teffil™

Teffil™ is a range of superior pleated PTFE membrane filters with PFA supports. These cartridge filters are suitable for use within a number of microelectronics, process and chemical applications. This chemically inert filter range offers the removal of fine particulate from 0.05-10 micron in challenging operating conditions.

5.    Teffil™ HF

Teffil™ HF is a range of fully optimised high flow PTFE membrane filters with PFA supports. These cartridge filters are suitable for use within a number of chemical applications within the microelectronics industry, including organic stripper, IPA and other solvent recirculation bath applications. This chemically inert filter range offers the removal of fine particulate from 0.05-5 micron in challenging operating conditions.

6.    Compfil™ DF-P

The Compfil™ DF-P filter is a pleated depth filter, with stainless steel end caps, inner and outer guard. Consisting of a three dimensional borosilicate depth media, the DF achieves a void volume of 95%, ensuring a high containment capacity at high flow rates and low differential pressure.

7.    Compfil™ PD

CompfilTM PD is a pleated depth filter with inner and outer guard and end caps made of stainless steel. Consisting of a three-dimensional borosilicate depth media, the PD achieves a void volume of 95%, ensuring a high containment capacity at high flow rates and low differential pressure.

8.    Compfil™ WD

CompfilTM WD is a wound depth filter with inner and outer guard and end caps made of stainless steel. Consisting of a three-dimensional borosilicate depth media, the WD achieves a void volume of 95%, ensuring a high containment capacity at high flow rates and low differential pressure.

9.    Compfil™ WV

CompfilTM WV is a pleated depth filter with inner and outer guard and end caps made of stainless steel. Consisting of a three dimensional borosilicate depth media, the WV achieves a void volume of 95%, ensuring a high containment capacity at high flow rates and low differential pressure.

10.  Compfil™ ST

CompfilTM ST is a wound depth filter with inner and outer guard and end caps made of stainless steel. Consisting of a three-dimensional borosilicate depth media, the ST achieves a void volume of 95%, ensuring a high containment capacity at high flow rates and low differential pressure.

11.  Compfil™ SF

The CompfilTM SF filter is designed for removal of particles from gases, liquids and steam. The SF consists of a re-generable isostatically pressed filter cylinder made from sintered stainless steel. The retention rate ranges from 1μm to 25μm.

12.  Compfil™ AR

Pre and final filter with absolute retention rate for particle removal from aqueous solutions, water and other liquids, as well as gases. The AR consists of a regenerable stainless steel mesh, with stainless steel outer guard and end caps. The retention rate ranges from 5μm up to 250μm.

13.  Compfil™ PC

CompfilTM PC is a pleated depth filter with inner and outer guard and end caps made of stainless steel. Consisting of a three-dimensional borosilicate depth media, the PC achieves a void volume of 95%, ensuring a high containment capacity at high flow rates and low differential pressure.

14.  Microcap™ PES

MicrocapTM PES capsules are used for sterile filtration in the most critical pharmaceutical applications, such as: sterilising filtration of USP Water for Injection (WFI), diagnostic solutions, vaccines, ophthalmics, SVPs, LVPs and biological products.

15.  Microcap™ PPP

MicrocapTM PPP capsules are used for the pre-filtration of bulk pharmaceutical chemicals, water, buffers, solvents, alcohols and other liquids. They are also designed to protect membrane filters in filling applications for SVPs, LVPs, diagnostics, ophthalmics, biologicals and other products.

16.  Microcap™ GPP

MicrocapTM GPP general service grade capsules are used for the removal of particulate contaminants from water, inks, dyes and speciality chemicals.

17.  Microcap™ PFE

MicrocapTM PFE capsules are manufactured for the critical needs of the pharmaceutical industry. Made with highly hydrophobic polytetrafluoroethylene (PTFE) membrane, these capsules are used for the filtration of non-aqueous liquids, aggressive solvents, compressed gases and as vent filters.

18.  Microcap™ PNY

MicrocapTM PNY capsules are designed to be used for sterilising grade filtration. The high quality nylon membrane is optimised for retention. Nylon capsules see broad service in sterile fill applications in SVPs and as bioburden management filters in LVPs.

19.  Bonfil™

Bonfil™ is a resin bonded filter that is constructed using an advanced manufacturing process producing a rigid graded density filter. The rigid phenolic resin structure ensures that our Bonfil™ filters can withstand high viscosities and temperatures without deformation or collapse of the pores.

Mike Hughes, General Manager, comments:

“The 2020 edition of the Porvair product catalogue marks the largest growth in our product range since its introduction. As a customer led organisation, Porvair will continue to develop high quality products in response to market demand. ”
#
For more information, please contact:

Porvair Filtration Group Ltd
Segensworth Division
1 Concorde Close
Segensworth
Fareham
Hampshire
PO15 5RT
United Kingdom
Tel:  +44 (0)1489 864330
Email: info@porvairfiltration.com
Web:  www.porvairfiltration.com
PandCT.com are not responsible for the content of submitted or externally produced articles and images.
Click here to email PandCT about any errors or omissions contained within this article.
     
Send this page
To send this page to a colleague or friend,
fill in the email addresses below...
Your email address
Their email address:
Page to be sent: shownews.asp?ID=55162

Company gateway pages
for Porvair Filtration Group :
FREE Information on the products in this article
To request more information,
fill in your email address below.
Your email address
 
     
Bookmark and Share
Product categories: Accelerometers | Actuators | Agitators | Analysers | Bearings | Compressors | Controllers | Conveyors | Drives | Enclosures | Flowmeters | Heat Exchangers | Motors | Pumps | Relays | Sensors | Transducers | Transmitters | Valves | Weighing
(c) Copyright 1999-2020 Process and Control Today Ltd  |  Reg. no 3733110  |  Email Editor  |  Email Webmaster  |  Sitemap  |  Privacy Policy