ABB drive saves £2,000 a year energy costs for plastic moulder
24/07/2014 ABB Limited (Drives & Motors)
A plastic components manufacturer is saving nearly £2,000 a year in energy costs on one of its injection moulding machines through retrofitting an ABB variable-speed drive (VSD).Newtown Plastics fitted the VSD following a joint energy appraisal report by ABB and City Electrical Factors (CEF). Wayne Trematick, Energy Consultant, comments "the energy appraisal showed that the company could save £1,963 on energy costs, with an 18 months payback. This is a very compelling reason for installing drives."
The company, based in Newtown, Mid Wales, makes a wide variety of moulded plastic components, both its own ranges and bespoke designs. These range from display cases to caps and closures and a wide variety of components for use in the pharmaceutical, retail, construction, automotive, aerospace, electrical and other industries.
Following ABB's energy appraisal, a machine with an 18.5 kW motor was identified as a prime candidate for retrofitting a VSD.
Simon Church, director of Newtown Plastics, explains: "We have 14 machines in total but this one was identified as suitable because it had such a long cycle time. It operates for 40 weeks a year making a perfume display case and requires a long cooling time. During this time, the hydraulic motor is not doing any work but is still running at top speed, so this was an obvious choice for an energy saving project.
"There are several other bigger machines but these all operate with a faster cycle time, so are not so suitable for VSD control."
The process - which has a 50 percent load and a 50 percent idle cycle - was logged for seven days to confirm cycle times and on and off load values. .
Speed control on this application is not controlled via a pressure transducer, but instead relies on the drive's internal load measurements to decide when the pump is doing useful work or recycling back to the tank.
When the pump is recirculating fluid back to the tank, while the plastic part is being cooled, the speed of the motor is dropped to 50 percent. Off load power has been reduced from 7 kW to 3.7 kW, giving an annual saving of £1,963 a year.
Says Church: "I have been very impressed with the savings from the project. We have a compressor with a VSD and our new machines come equipped with servo drives so we know about the technology of VSDs and can't fault them."
ABB (www.abb.com) is a leader in power and automation technologies that enable utility and industry customers to improve performance while lowering environmental impact. The ABB Group of companies operates in around 100 countries and employs about 150,000 people.
For more information, please contact:
Neil Ritchie
ABB Limited
Discrete Automation & Motion
Tel: +44 1925 741 111
Fax: +44 1925 741 212
Email: energy@gb.abb.com
Web: www.abb.co.uk/energy
Print this articleShare article:
Process and Control Today are not responsible for the content of submitted or externally produced articles and images. Click here to email us about any errors or omissions contained within this article.