Endress+Hauser Introduces Liquipoint FTW33 Level Switch for Liquids
24/06/2013 Endress+Hauser Ltd
Conductivity sensor can be used in storage, mixing and process vessels with or without an agitator, and it meets all international hygiene requirements.June 21, 2013-€â€Endress+Hauser releases the Liquipoint FTW33 point level switch for liquids. Designed for hygienic processes, the FTW33 meets FDA requirements as well as 3A Sanitary Standard Number 74. It can be used in pipes; and in storage, mixing and process vessels, with or without an agitator.
The Liquipoint FTW33 conductivity sensor is built for tough applications in the food and beverage market. The Liquipoint FTW33 measures the presence of conductive liquids with an electrical conductivity greater than 1 µS/cm. It also has an optional build-up compensation feature that allows it to switch reliably in heavy build-up and viscous products like tomato paste, honey, molasses, and peanut butter. The sensor can also be used for detecting the foam that commonly occurs in the food industry.
Materials in contact with the process are made of 316L stainless steel with PEEK insulation, making the FTW33 suitable for use in processes that require cleaning and sterilization. The sensor can be used in process pressures from -14.5 to +362.5 PSI, and temperatures up to 212 °F (100 °C). It can also be used in cleaning and sterilization processes to 302 °F (150 °C) for up to 60 minutes, and is resistant to typical cleaning agents. The sensor has a DC-PNP 3V switching output when it can be used for point level. These signals are typically used for overfill and high level detection, or for low level detection to prevent a pump from running dry.
For more detailed technical information on the Liquipoint FTW33 point level switch, please visit the product page at: http://www.us.endress.com/liquipoint-ftw33
For further information, please contact Crystal Abrell:
Endress+Hauser, Inc.
Phone: 317-535-7138
Fax: 317-535-2171
crystal.abrell@us.endress.com
www.us.endress.com
Print this article
Process and Control Today are not responsible for the content of submitted or externally produced articles and images. Click here to email us about any errors or omissions contained within this article.