Low Viscosity, One Part Cyanoacrylate Is Non-Toxic and Meets ISO 10993-5 Specifications
27/08/2014 Master Bond Inc
Master Bond MB250NT is widely used for a variety of applications ranging from repair to high speed production for disposable/reusable medical devices and passes ISO 10993-5 testing requirements. It also resists EtO and gamma sterilization processes.This single component ethyl cyanoacrylate cures rapidly depending upon the atmospheric humidity-€â€the higher the level, the faster the rate of cure. There is no mixing or heating required for curing. Since the cure is usually fast, only minimal contact pressure is required for bonding. MB250NT will typically set up within 10-40 seconds. It has a low viscosity of 100-110 cps.
Featuring high tensile laps shear strength values, MB250NT bonds well to a variety of substrates especially metals, composites, most plastics and rubbers. The service temperature range for this system is -60°F to +250°F. It has a shelf life of about 6 months in its original, unopened containers.
For more information, please contact:
James Brenner
Marketing Manager
MASTER BOND INC
154 Hobart Street
Hackensack
NJ 07601-3922
Tel: +1-201-343-8983
Fax: +1-201-343-2132
Email: jbrenner@masterbond.com
Web: www.masterbond.com
Print this articleShare article:
Process and Control Today are not responsible for the content of submitted or externally produced articles and images. Click here to email us about any errors or omissions contained within this article.