Pumps go mobile sewer flushing

24/10/2023  Borger UK Ltd

Rotary Lobe Pumps made by Borger have been installed on a fleet of sewer flushing vehicles for a private contractor.

Initial purification is achieved when the pumps extract wastewater through a coarse filter installed on the vehicles, The still unpurified wastewater is then pumped into a centrifugal separator (cyclone), which separates other impurities, such as sand. The clean water is then pumped to the storage tank in the vehicle for further use; primarily for flushing sewers.

Thanks to the reversibility of the Borger pumps, they can be used for additional purposes. The pipe lines to the suction and pressure side of the pump are fitted with cardan couplings. If required, these couplings can be connected to hoses or pipe lines. This then also allows the storage tank to be filled or discharged with clean water. Due to the option of reversing the pump direction, the pipe line systems are much easier to set up in the vehicle.

Print this article

For more information, please contact:
Borger UK Ltd
Tel: +44 (0)1902 798977
Email: uk@boerger.com
Web: https://www.boerger.com

Visit company profile page

Share article:

Next Article

---

Over 30 Manufacturers Showcase OMS-Compliant Products at Enlit's OMS Booth

Process and Control Today are not responsible for the content of submitted or externally produced articles and images. Click here to email us about any errors or omissions contained within this article.