The top five things that cause inverter failure
10/11/2014 European Automation
Following up on his previous blog post on the top five things that go wrong with electric motors, the next component Jonathan Wilkins will be looking in the series is the humble drive.Inverters, drives, VSDs, variable speed drives, variable frequency drives - the category of products used to control an electric motor's speed and thus reduce energy usage in a variable speed application has more names than Prince. Although, I suppose when you think about it he only has three really, if you include his decision in 1993 to become known by a symbol instead of a word.
Capacitor wear - Working like a dog
The first reason for inverter failure is electro-mechanical wear on capacitors. Inverters rely on capacitors to provide a smooth power output at varying levels of current; however electrolytic capacitors have a limited lifespan and age faster than dry components. This in itself can be a cause of inverter failure.
Capacitors are also extremely temperature sensitive. Temperatures over the stated operating temperature, often caused by high current, can reduce the life of the component. However, as the electrolytes evaporate faster at higher temperatures, capacitor life increases when they are run at lower than operating temperature.
Happily, keeping a consistent maintenance regime and regularly replacing capacitors avoids most problems that failed capacitors can cause.
Overuse - Too much of a good thing
Using inverters beyond their operating limit, either by choice or due to oversight or lack of knowledge, can contribute to inverter bridge failure. Using any component at a rating higher than its operating limit will decrease its lifespan and lead to failure, so avoiding this issue simply comes down to checking that all inverters are being run correctly.
Over- and under-voltage - The power you're supplying, it's electrifying!
The next two issues that can cause inverter failure are over-current and over-voltage. If either current or voltage increases to a level that the inverter is not rated for, it can cause damage to components in the device, most frequently the inverter bridge. Often this damage will be caused by the excess heat generated by the spike in voltage or current.
Over-current can be avoided with fuses or circuit breakers but avoiding over-voltage can be tricky. Sometimes voltage spikes are man-made, but they can also be caused by lightning or solar flares which are difficult to avoid if, like us, you live on planet Earth.
Ultrasonic vibrations - I'm picking up good vibrations
The final problem on the list is one that contributes to the mechanical stress placed on an inverter. Ultrasonic vibrations originating in the cores of inductive components cause friction, adding to the unwanted heat generated by the device and further damaging components in the inverter.
When European Automation buys a drive for future re-sale, we ensure that it's free of these problem and others. However, you should be aware that the European Design Directive puts a limit on the amount of repair work you can do without beings considered to be 'introducing a new product to the market', rather than repairing an existing one.
So, don't suffer in silence, if you are baffled by a broken drive, confused by the countless ways to control an electric motor or even just perplexed by Prince's name choices, get in contact with European Automation. We promise not to change our name to a symbol.
For more information, please contact:
Jonathan Wilkins
European Automation
Unit 3
Parker Court
Staffordshire Technology Park
Stafford
ST18 0WP
Tel: +44 845 521 3088
Email: jonathan.wilkins@euautomation.com
Web: www.euautomation.com
Print this articleShare article:
Process and Control Today are not responsible for the content of submitted or externally produced articles and images. Click here to email us about any errors or omissions contained within this article.