Turck Banner's RI angle sensors allow application-specific teach process in the field
05/06/2013 Turck Banner Ltd
Turck Banner has added new functions to its range of RI inductive angle sensors. From now on, users can teach the RI sensors directly at the device. Not only is it possible to call up hard programmed angle ranges, but start and end points can also be defined for the sensors as required. The sensors were developed for use in mobile devices in accordance with the e1 specification. On the RI sensors, the angle position is not measured with a magnetic positioning element, but by means of an RLC circuit. This sensor is thus completely immune to magnetic fields, such as for example those of large motors.The RI sensors have a measuring range of 360° with an accuracy of 0.15 percent of full scale. The contactless principle reliably compensates bearing tolerances of the applications as well as vibrations caused by shaft eccentricity. This guarantees a high linearity.
For further information, please contact:
Turck Banner Ltd
Tel: 01268 578888
Email: sensors@turckbanner.com
Web: www.turckbanner.co.uk
Print this articleShare article:
Process and Control Today are not responsible for the content of submitted or externally produced articles and images. Click here to email us about any errors or omissions contained within this article.