In focus manufacturing

The leading and longest established online Process Engineering publication serving the Process Manufacturing Industries

Veolia and Affinity Water work closely to find solution

Marlow, UK, 21 October 2013 - Veolia Water Solutions & Technologies has been working closely with Affinity Water to develop a process to remove metaldehyde from drinking water. Metaldehyde, a pesticide used for slug control, is being found in many UK water sources, with a potential risk of non compliance with Water Quality Regulations, which set a maximum concentration of 0.1µg/l for pesticides. To deal with this issue, Affinity Water has been looking at removal technologies. In December 2012 Veolia installed a pilot scale ActifloCarb® system at Affinity Water's North Mymms treatment works and, in close cooperation with Affinity Water, operated it for three months during which it consistently achieved metaldehyde residuals of less than 0.02µg/l.

Based on the highly successful Actiflo® high rate, sand-ballasted sludge clarifier, ActifloCarb® adds powdered activated carbon (PAC) to adsorb pesticides. PAC, coagulant and flocculant chemicals are added along with fine sand for weighting the resulting floc which is removed in a lamella clarifier. Most of the PAC is recirculated to minimise operating costs, and the sand is recovered in a hydrocyclone.

"We needed to find a technology to remove metaldehyde," says Affinity Water's Process Engineering Science Manager, Richard Lake. "This collaboration with Veolia has been a great success and demonstrated that ActifloCarb® is effective treatment against this pesticide."

Visit www.veoliawaterst.co.uk for further information on ActifloCarb® and other treatment solutions.

For more information, please contact:

Veolia Water Solutions & Technologies
Marlow International,
Parkway, Marlow,
Bucks
SL7 1YL
UK

Tel:  + 44 (0) 1628 897000
Email: enquiries@veoliawaterst.co.uk
Web:  www.veoliawaterst.co.uk

Request FREE information from the supplier on the products in this article

Login or Register

Process and Control Today are not responsible for the content of submitted or externally produced articles and images. Click here to email us about any errors or omissions contained within this article.

Get the weekly eNewsletter from Process and Control Today